Optimized microwave excitation probe for general application in NDT of wall thinning in metal pipes of arbitrary diameter

Generalized approaches to developing a microwave NDT for flaws inside an arbitrary diameter pipe through optimizing a microwave-exciting probe were investigated. A microwave probe obtained from a parameter-optimizing scheme based on transmission characteristics is proposed. Three-dimensional finite element simulation of five microwave probes indicates that a larger optimization parameter enables reduced microwave reflection, as well as improved single-mode propagation inside the pipe as compared with conventional probes. Experimental verification, using straight brass pipes of various diameters confirmed that the optimized microwave probe exhibits a larger signal-to-noise ratio for internal flaws when compared with conventional probes, thereby validating the new optimization parameter.     

Analytical solution for interaction of an arbitrary frequency curved rectangular inducer with a transverse ring shaped groove surrounding a long conductive cylinder

Field distributions around a transverse flaw surrounding a conductive cylinder which is excited by a three-dimensional inducer at arbitrary frequency are presented analytically. The solution is obtained by developing a two-dimensional Fourier series model and using Bessel functions in the third dimension. The metal is assumed as a lossy material and all possible field components in the conductor are expanded. After applying the mode-matching technique, a linear system of AX=B is solved to obtain the unknown coefficients. The accuracy of the proposed modeling technique is confirmed by comparing our results with those obtained by CST finite integration code.     

Characterisation of crack-tip fields in biaxial fatigue based on high-magnification image correlation and electro-spray technique

This work presents a novel methodology for characterising fatigue cracks under biaxial conditions on a low carbon steel. It allows both short crack and early propagation stages to be studied in tubular specimens. Short crack growth is studied with a long-distance microscope acquiring images of the bare metal surface. Results showed oscillations in crack growth rate due to microstructure. Early propagation stage is studied with high magnification Digital Image Correlation (DIC) technique for measuring displacement and strain crack-tip fields. By applying micro-speckle pattern on the metal surface it is possible to achieve high magnification for DIC technique. Ultra-fine black and white speckles were created by electro-spray technique. The validity of this novel technique is demonstrated by direct comparison with extensometer measurements, under combined tension–compression and torsion conditions. It was also possible to estimate satisfactorily the mixed-mode stress intensity factor.     

Tannin based foams modified to be semi-conductive: Synthesis and characterization

The objective of this study was to modify highly insulative and lightweight biorenewable foam thermosets to be semi-conductive for primarily building material applications. The foams were formed and then post-treated with in-situ polymerization of polyaniline, both doped and undoped, adsorbing and possibly absorbing (observed by SEM-EDX) to the foam structure at levels of 100–120 wt%.The modified tannin foams were shown to be semi-conductive in comparison to the highly insulative structure prior to polyaniline modification. While the 50% protonated polyaniline modified foams, or doped foams, had a higher conductivity than the undoped polyaniline modified foams, the acid used in fabrication of the foams provided some degree of conductivity to the undoped PANI modified foams. Moreover, the modified foams had an increased volume of 15% after modification, were more sensitive to moisture, and the polyaniline did not affect the degradation temperature of the foams.     

A physically-based model for global collision avoidance in 5-axis point milling

Although 5-axis free form surface machining is commonly proposed in CAD/CAM software, several issues still need to be addressed and especially collision avoidance between the tool and the part. Indeed, advanced user skills are often required to define smooth tool axis orientations along the tool path in high speed machining. In the literature, the problem of collision avoidance is mainly treated as an iterative process based on local and global collision tests with a geometrical method. In this paper, an innovative method based on physical modeling is used to generate 5-axis collision-free smooth tool paths. In the proposed approach, the ball-end tool is considered as a rigid body moving in the 3D space on which repulsive forces, deriving from a scalar potential field attached to the check surfaces, and attractive forces are acting. A study of the check surface tessellation is carried out to ensure smooth variations of the tool axis orientation. The proposed algorithm is applied to open pocket parts such as an impeller to emphasize the effectiveness of this method to avoid collision.     

A modified cross-correlation algorithm for PIV image processing of particle-fluid two-phase flow

PIV (Particle Image Velocimetry) technique for flow field measurement has achieved popular self-identify through over ten years development, and its application range is becoming wider and wider. PIV post-processing techniques have a great influence on the success of particle-fluid two-phase flow field measurement and thus become a hot and difficult topic. In the present study, a Phase Respective Identification Algorithm (PRIA) is introduced to separate low-density solid particles or bubbles and high-density tracer particles from the PIV image of particle-fluid two-phase flow. PTV (Particle Tracking Velocimetry) technique is employed to calculate the velocity fields of low-density solid particles or bubbles. For the velocity fields of high-density solid particles or bubble phase and continuous phase traced by high-density smaller particles, based on the thought of wavelet transform and multi-resolution analysis and the theory of cross-correlation of image, a delaminated processing algorithm (MCCWM) is presented to conquer the limitation of conventional Fourier transform. The algorithm is firstly testified on synthetic two-phase flows, such as uniform steady flow, shearing flow and rotating flow, and the computational results from the simulated particle images are in reasonable agreement with the given simulated data. The algorithm is then applied to images of actual bubble-liquid two-phase flow and jet flow, and the results also confirmed that the algorithm proposed in the present study has good performance and reliability for post-processing PIV images of particle-fluid two-phase flow.     

THE effect of Srandom DOPANT fluctuation on threshold voltage and drain current variation in junctionless nanotransistors

We investigate the effect of dopant random fluctuation on threshold voltage and drain current variation in a two-gate nanoscale transistor. We used a quantum-corrected technology computer aided design simulation to run the simulation (10000 randomizations). With this simulation, we could study the effects of varying the dimensions (length and width), and thicknesses of oxide and dopant factors of a transistor on the threshold voltage and drain current in subthreshold region (off) and overthreshold (on). It was found that in the subthreshold region the variability of the drain current and threshold voltage is relatively fixed while in the overthreshold region the variability of the threshold voltage and drain current decreases remarkably, despite the slight reduction of gate voltage diffusion (compared with that of the subthreshold). These results have been interpreted by using previously reported models for threshold current variability, load displacement, and simple analytical calculations. Scaling analysis shows that the variability of the characteristics of this semiconductor increases as the effects of the short channel increases. Therefore, with a slight increase of length and a reduction of width, oxide thickness, and dopant factor, we could correct the effect of the short channel.     

Influence of pulsed electric field and heat treatment on Emblica officinalis juice inoculated with Zygosaccharomyces bailii

The effects of pulsed electric field (PEF) applying 26 kV cm⁻¹ with 1 μs monopolar pulses (for 500 μs) on inactivation of Zygosaccharomyces bailii and the stability for the key quality characteristics (vitamin C, phenolic content, antioxidant capacity, nonenzymatic index, 5-hydroxymethyl-2-furfural (HMF), °brix, and pH) in Emblica officinalis juice were studied. These results were then compared to those of heat treatment (90 °C for 60 s) up to 40 days on storing at 4 °C. PEF treatment reduced 5.1 log cycles of Z. bailii with decreases in HMF concentration and browning index relative to heat treated juice. Simultaneously, PEF treated juice retained 63% of vitamin C and 88.9% of antioxidant capacity (p < 0.05). However, heat treated juice lowered 4.9 log cycles of Z. bailii and exhibited significant degradation of vitamin C and antioxidant capacity (p < 0.01). After all, both treatments did not induce any major changes in pH and °brix levels of emblica juice. Electron microscopy was used as a tool to find Z. bailii damage induced. Investigation of their morphology showed a leakage of cellular debris owing to the rupture of cell membrane of PEF treated Z. bailii. Thus, PEF treatment on emblica juice may offer an enormous potential for upgrading its quality than the heat processing method.     

基于matlab的电磁场仿真与分析

电磁场问题往往较为抽象，并且计算也相对比较复杂。为此，借助计算机软件对复杂问题进行求解的重要性也得到凸显。本文通过两个例子，着重介绍了matlab在电磁场仿真与数值分析中的应用。结果表明这一方法具有计算效率高，能使抽象的场的问题具体化的优点。     

田赛距离测量中全站仪的设计与实现

本文提出了将智能全站仪这种精密测量仪器广泛应用于田赛项目测量中，并结合其他科技元素用于解决田赛项目中跳远、投掷等项目的测量及数据管理问题，实现实时、自动、准确地裁定和报告比赛成绩。